Join our mailing list!




  Home > 3D KITS >

3D Window® PC-IR Kit



 
Alternative Views:


Our Price: $125.00

Product Code: PCIR
Qty:

Description
 
3D Window® PC-IR Kit For use with 3D Software Players on a PC
(or with devices giving 100hz or higher frame sequential 3D output)

EMITTER OPERATION FOR DISPLAYS THAT ACCEPT 120HZ FRAME SEQUENTIAL INPUT (operation at lower frequencies possible) Such displays include 120 Hz 3D LCD Monitors certified for use with Nvidia 3D Vision 3D ready DLP or LCD projectors (over 100 consumer and Pro Models) 100 Hz and above analog CRT monitors and projectors .

Kit includes one emitter + Model DSS DVI/HDMI SYNC splitter + One pair of 3d glasses

EMITTER OPERATION FOR 3D DLP TV’s from Mitsubishi and Samsung and Pre 2010 Model Samsung 3D Ready Plasma TV’s

Use the 3D Window kit with 3D Vision or other software player (but Nvidia 3DTV Play will NOT output the DLP TV checkerboard format nor the 120hz frame sequential format but only the frame packed formats—for these you must use 3D Vision or one of the 3D file players as noted below). Read “Connecting your 3D Ready DLP TV” and the FAQ on our page www.3dmagic.com!! For 3D Vision you must have the nVidia emitter OR our 3D Window PC-RF kit emitter plugged into the PC USB port OR be running an nVidia 3D Vision Emitter software emulator, readily available on the net (but not for the novice and always carrying the possibility of terminating some or all of your PC functions). This emulator tricks 3D Vision into thinking the nVidia emitter is plugged into the USB port.

EMITTER OPERATION WITH 3D BluRay player, PS3, XBOX, OR 3D CABLE TV or NVidia 3DTV Play on a PC, for output to 120hz Frame Sequential Displays

Use this option if you have 120 Hz 3D LCD Monitors certified for use with Nvidia 3D Vision, OR 3D ready DLP projectors(over 100 consumer and Pro Models) or 100 Hz and above analog CRT monitors and projectors. In these cases use some device to convert the frame packed 3D format to 120hz frame sequential format such as boxes from Viewsonics, VIP, Optoma, Lumagen, Moome etc. In this case the DSS/LC Emitter is installed between the box and the 120hz display(of course since most such devices have a stereo Vesa Port, you may alternatively use our Gen2, LC or SS1 Emitters without this 3D Window Kit—i.e., without the DSS).

Once the DSS in this kit has been installed between your PC and your 3D Ready Projector ( or any display capable of accepting 120hz frame sequential 3D input listed above), plug the Model LC Emitter into the miniUSB cable coming from the DSS. Press the on/off button on top and the left sync LED will light. If the images are reversed you can use a hotkey in the software or the L/R button on the Emitter to reverse them. The power input on the rear of the Emitter is not used in the 3D Window® kit. If you are using the Emitter with Nvidia 3D software, the Emitter/Glasses will not operate until you plug an Nvidia compatible emitter into the PC USB port as discussed below. Again as an alternative to a USB emitter you could run an nVidia 3D Vision Emitter software emulator, readily available on the net (but not for the novice and always carrying the possibility of terminating some or all of your PC functions). This emulator tricks 3D Vision into thinking the nVidia emitter is plugged into the USB port. New nVidia updates try to block the emulators but of course the emulators are soon updated.

EMITTER OPERATION WITH NVIDIA 3DTV PLAY on a PC or PS3, XBOX, OR 3D CABLE TV with output to HDMI 1.4a Displays such as 3DTV sets that only accept frame packed formats. (EXPERIMENTAL)

In these cases the 3D video is played out at 60hz in a frame packed side by side or top/bottom format and you must have an HDMI 1.4a compatible display that accepts these formats. To get 120hz sync for the emitter/glasses you will then use one of the above 3D format converters in parallel by splitting the output from the frame packed source with a HDMI/DVI splitter and one output goes to the HDMI 1.4 display (e.g., 3DTV set) and the other to the format converter with attached SS1 Emitter. If you are using Nvidia 3D Vision 3D software on a PC and our 3D Window PC-RF Emitter plugged into the USB port on a PC, it will run simultaneously with the SS1 emitter/glasses.

GLASSES OPERATION

The 3D Window LC Emitter works ONLY with Cinema mode glasses from 3DTV Corp or other companies. Some versions are used in 3D Cinemas to view 3D Movies. Current 3DTV Corp compatible models are CL, C1, CF1 and CK (children’s version) with E, U, CF2, CK2, and V due soon. Compatible glasses include JVC DLA, HP Envy, XpanD 101 and 103, Volfoni, Philips 3DTV and many others. Please see the instructions with your models to turn them on once the 3D Window Emitter button has been pressed and the two Lights are on.

Glasses turn off in 2 min if no signal. TURN OFF OR UNPLUG EMITTER AND/OR GLASSES OR THEY WILL CONTINUE TO OPERATE!!

When watching 3D images under a fluorescent lamp (50HZ-60HZ) or a 3 wavelength lamp, you may notice a small amount of screen flickering in which case dim the light or turn the lamp off. When using the 3D Window system with a 3DTV set you may find that if you change the channel or input mode when watching 3D, the 3D glasses are turned off, and the image could be displayed abnormally in which case you may need to restart 3D Vision or 3DTV Play.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

3D KITS
3D KITS > For PC's
3D KITS > For Projectors